Energy Code Certificate

Are you leaving behind an insulation certificate on your jobs?

 

The last few weeks we have talked about Energy Code Compliance, the prescriptive path, the performance path and the Energy Rating Index.

But did you know that an energy code certificate is mandatory to meet the residential code?

The overall energy code certificate is the responsibility of the builder or the registered design professional and should be posted on or in the electrical distribution panel. And it should list the following:

  • R-values of insulation installed in or on ceiling/roof, walls, foundation (slab, basement wall, crawl space wall and/or floor) and ducts outside conditioned spaces
  • U-factors for fenestration and the solar heat gain coefficient (SHGC) of fenestration
  • Results from any required duct system and building envelope air leakage testing done on the building
  • Types and efficiencies of heating, cooling and service water heating equipment, if applicable

Where there is more than one value for a component, the certificate shall list the value covering the largest area.

Notice, that as an insulation professional, your activities are only a portion of the overall energy code certificate, but you should supply the insulation information. So, to provide the best service to your customers, it is your responsibility to make sure that you leave behind an insulation certificate on your jobs.

If you are not actively using insulation certificates, you can get a sample certificate from SPFA technical documents, SPFA-148, or possibly from your material supplier.

Stay tuned next week as we continue to discuss the interesting world of spray foam insulation.

Subscribe here to keep in touch with Spray Foam Advisor and get your FREE copy of 25 SPF Frequently Asked Questions and a PRIVATE link to Robert Naini’s SPFA Breakout Session, “3 Ways to Close More Sales with Building Science.”

Spray Foam Advisor, LLC

© 2014 – 2022 All Rights Reserved